This acricle based on VMware KB 68035: https://kb.vmware.com/s/article/68035

So, ESG installed, however having error under log:

Here I will collect main steps to deploy UbuntuKVM on esxi for NSX-T deployment for testing purposes.

1. Install NSX-T version 2.4.1

2. Install Ubuntu 16.04.2 as most compatable

Why NSX-t v2.4.1: I am currently want to stick to VMware Validated Design VVD 5.1

1. Log in to the vCenter via vSphere client, right click the cluster and click “Deploy OVF

Sometimes you can see errors that one of the NSX controllers not healthy.

First, try to SSH to the applience and check logs.

Also, good practice to restart

111

ISSUE: When navigating to your vCenter Web Client (Flash) page, the browser no longer allows you to check the “Use Windows session authentication” box.

FIX: need to

NSX Manager version: 6.4.1
Appeared in earlier versions too.

Issue: The /var/log is full with 100% utilization for all 3 Controllers.
root@nsx-controller [ /var/log ]# df

This is basically a root bash shell on the underlying Linux based appliance. From here, system configuration files and scripts as well as most normal Linux functions can be

To take full advantage of the Intel® Converged Network Adapter's capabilities, enable Receive Side
Scaling (RSS) in the ESXi host to balance the CPU load across multiple cores. Refer to the

Some useful NSX CLI commands:

System related:

• ESXi build and version numbers
  esxcli system version

In the realease notes you will find a description of all the news ...

vRNI was installed and configured, but we forgot to put proper license and after demo license expired, we was locked down to put active license into environment.

Some work

After I decided to have VSAN on my small home lab, I looked up some

GNS3 server is running on a VM (ESXi host). Second interface eth1 connects from the VM to the default vSwitch0.  The interface tap0 is a loopback interface on the GNS3 server, which I used

VMware PowerCLI 10.0.0 is the new release of PowerCLI and the first to become multi-platform: it adds support for Mac OS and Linux!

Thanks to Microsoft PowerShell Core 6.0, the

I just had an issue with vCenter 6.0 and ESXi 6.0 where I was unable to deploy OVF power on a VM.

The error which I was faced with was a relatively generic message based on the host

Issue:

I have recently had the requirement to put a NAT router performing NAT overload between an ESXi server and it's respective vCenter server. According to VMware ...

Sometimes you need pass through Trunk to VMs on ESXi emvitonment. Ex: Nested ESXi with NSX.

To set a standard vSwitch portgroup to trunk mode:

1. Edit host networking

I am getting lot of duplicate packets when i ping from host to host or from gusers on different hosts:

64 bytes from 10.0.58.192: icmp_seq=169 ttl=64 time=0.930 ms
64 bytes from

If you experience issue with Host Preparation on your LAN NSX enviroment, it could be related with SSL certificate and dificulties to