Dell N-series Switch - Enable HTTPS/SSH/SNMPv3 and disable HTTP/Telnet/SNMP1,2

 

 

1. Make sure switch is already configured with an IP address and is reachable within the network.

2. Make sure there is an account created with Privilege Level 15. (show users accounts

3. Caution: Before disabling either telnet or HTTP access, verify SSH or HTTPS access.

4. To enable SSH, enter the following commands

  • console(config)#crypto key generate rsa
  • console(config)#crypto key generate dsa
  • console(config)#ip ssh protocol 2
  • console(config)#ip ssh server

5. Disable telnet:

  • console(config)# ip telnet server disable

6. Enable HTTPS:

  • console(config)# crypto certificate 1 generate
  • console(config-crypto-cert)#key-generate
  • console(config)# ip http secure-server

7. Disable HTTP: 

  • console(config)# no ip http server

8. SNMP

  • no snmp-server community
  • snmp-server group snmpgroup v3 priv
  • snmp-server user snmpuser snmpgroup auth-sha <AUTHKEY> priv-des <SHAREDKEY>

AUST IT - Computer help out of hours, when you need it most.

Find out why we do it for less.

About

AUST IT will help you resolve any technical support issues you are facing onsite or remotely via remote desktop 24/7. More...

Contacts

Reservoir, Melbourne,
3073, VIC, Australia

Phone: 0422 348 882

This email address is being protected from spambots. You need JavaScript enabled to view it.

Sydney: 0481 837 077

Connect

Join us in social networks to be in touch.

Newsletter

Complete the form below, and we'll send you our emails with all the latest AUST IT news.